Well Water Inspections
I you have any concerns about your well water quality, give me a
call. A well water test consists of inspecting the readily accessible
well components including the well head, proper distances to
possible contamination sources like private septic systems, farm
fields, etc, and a visual inspection of internal plumbing supply
pipes.

A yield test will be performed to document the short-term and long
term capacity (flow rate) of the system on the day of the
inspection.

Water samples will be taken, properly secured and delivered to a
state certified lab for analysis. Typical tests are Total Coliform and
Nitrates. Other tests can be conducted for an additional lab fees.
A chain of custody will follow the samples and the results will be
sent to the client usually within 3 to 5 days.

It is recommended that at minimum, a total Coliform
Bacteriological test be performed on an annual basis. It is very
important the tests are properly conducted and samples handled
properly in order to obtain valid results.

I am a Certified Well Sampler and will help you with this need.
Certified by the National Association of Certified Home Inspectors - Click here to verify.
Home Inspectors
Visit our Blog!!
Greg Liebig, CIAQT
B.S. Mechanical Engineering
WI License #1955-106
Updated: 1/21/08
Copyright © 2006-2008 4-Square Home Inspections, LLC  Sheboygan, WI All Rights Reserved
Greg Liebig - Home Inspector
4-Square Home Inspections, LLC
and Nitrates). This includes a review of the pressure tank and the home's internal plumbing
components. We may review the well head but it we will not open the well head for any
reason.

Call (920) 451-4646 to schedule your water quality test!
CALL or E-mail
(920) 451-4646
I'm available Daily
from 8 am to 9 pm